0% Complete
|
Sign in
|
Sign Up
Home
/
14th International Fiber and Polymer Research Symposium
Effect of vulcanization time on crosslinking of EPDM rubber
Authors :
Alara Meryem Ayaz
1
Omer Yunus Gumus
2
Muhammet Kara
3
1- Bursa Technical University
2- Bursa Technical University
3-
Keywords :
EPDM rubber،Vulcanization،Mooney-Rivlin،Crosslinking،Crosslinking density
Abstract :
The aim of this study is to examine the cross-link density of EPDM rubber mixture depending on the vulcanization time using the Mooney-Rivlin equation according to the stress-strain method. EPDM rubber vulcanized at different times at (5 min, 10 min, 15 min and 20 min). According to the strength data obtained by the stress-strain method of EPDM rubber vulcanized for different periods of time, the optimum vulcanization time was determined according to the cross-link density obtained by calculating with the Mooney-Rivlin equation. As the vulcanization time increased after 10 minutes, a decrease in cross-link density was observed. After the optimum vulcanization period, breaks or deteriorations may occur in the cross-links in rubbers. For this reason, a decrease in the physical and chemical properties of the rubber material may occur, and rubber reversion may occur. As a result, when cross-link densities at different vulcanization times were examined, the optimum vulcanization time was determined as 10 minutes.
Papers List
List of archived papers
Sustainable Production of Yarn Incorporating recycled fiber extracted from hard waste to Promote Sustainability
Ahsan Habib - Md. Abdullah Al Mamun - Osman Babaarslan
Developing of Steel-GFRP Hybrid Leaf Spring for Commercial Vehicles
Mehmet Deniz GUNES - Gediz KULAC - Goksel TOKGONUL - Taygun UZUNLAR - Sercan DAGLI - Hakan Salih ERDOGAN
Effects of chemical treatments on morphological, physical and chemical properties of okra bast fibers
Mahmut Ersoy - Nazire Deniz Yılmaz
New size based on modified maize starch and its application for the yarn sizing
Suzana Djordjevic - Ferhan Gebes - Marija Kodric - Dragan Djordjevic
Investigation of effects of MoEpPOSS nanoparticle on the morphological and rheological properties of PA6/TPE blends
İpek Yakar
Yeni Nesil Araçların Akışkan Transfer Sistemleri İçin TPV Hortum Geliştirme
Hande BEK - Serdar Yanılmaz - Ayşe Bedeloğlu - Tuncay GÜMÜŞ
Compressive Strength of PU Foam/Spacer Fabric Composite Structures
MHD MANSOUR NAKAWA
PLA/PET karışımlı hava tekstüre ipliklerinin performans özelliklerinin karşılaştırılması
SEZAİ OZAN - SUNAY ÖMEROĞLU
Utilizing discarded high-density polyethylene (HDPE) plastic for the production of sheath-core bicomponent filaments
Oumayma Rezguı - Fatih Süvari
Wound healing potential of fabricated PCL/CNPs/Ferula asefoetida extract nanofiber
Samaneh Kamalipooya - Davood Nasrabadi - Morteza Golmohammadi - Shohreh Fahimirad - Dr. Amin Esmaeili
more
Samin Hamayesh - Version 41.7.5