International Fiber and Polymer Research Symposium

| Sign in | Sign Up

Home / 14th International Fiber and Polymer Research Symposium

Compressive Strength of PU Foam/Spacer Fabric Composite Structures

Authors :

MHD MANSOUR NAKAWA¹

1- Istanbul Technical University

Keywords :

Polyurethane،PU/Spacer Fabric Composite،Composite،Flexible Polyurethane Foam،PU Foam Composite

Abstract :

Spacer fabrics (SF’s) have been used to reinforce flexible Polyurethane (PU) foams. The SF’s had different yarn linear densities and different compressive strengths. The Compressive strengths of composites were compared to both spacer fabrics and foam itself. The samples were prepared in a (10x10x1.5 cm) mold at 40ºC for 1 hour, and then left to be cured in room temperature for at least 24 hours. The results show that adding spacer fabrics to the PU foams increases the compressive strength of the composites. The compressive strengths of the 4 composites were compared to each other, and the results showed that increasing the yarn linear density increases the compressive strength, except for composite 3 which showed strain values higher than composite 2 which was inconsistent with the literature. SEM of the Foam samples showed an open-cell structure with diameters ranging from 0.1mm to 0.4mm.

List of archived papers

Nanofiber Production from Fire-Resistance PAN Polymers Containing Vinyl Phosphonic Acid

Elif Keskin - Mustafa Yılmaz - Nilgün Kızılcan - Nesrin Köken - Ahmet Akar

An investigation on bending properties of dyed and finished fabrics

Ayşe Şevkan Macit

Improving Sustainability and Mechanical Properties of Recycled PLA Nanofiber Membranes through Cyclic Re-Spinning

Reza Salehiyana - Bao Le - Eman Elessawy - Islam Shyha

Production of gelatin nanofiber wound dressings with hyaluronic acid extracted from chicken combs

HİLAL ÖZYURT - MEHMET ALİ TİBATAN - ALİ KILIÇ

Investigation of Maximum Stress Estimation of Fiber Reinforced Cementitious Matrix Composites by Using Machine Learning Approach

Ugur OZVEREN - Mete Simsek - Ezgi Lal BUDAK - Berkay HEPGULSUN - Ozge KAHRAMAN

Preparation and characterization of pH-indicative films based on poly(butylene succinate)/anthocyanin

Bedriye Ucpinar

Implementation of Lean Tool in a Knit Garment Factory for Improving Productivity

Ahsan Habib

Türkiye’de ilk kez üretilen toprak pigmentlerinin pigment baskı uygulanabilirliği

HALİL İBRAHİM TURGUT - ÖZLEM YARAR - BEGÜM SELÇUK ELGÜN

Kemik doku mühendisliği uygulamalarında poli(laktik asit) (PLA) kullanımı

Rumeysa İncesu - TARKAN AKDERYA - Ataberk KAPLAN - Gülbahar TABAKOĞLU - Cem GÖK

Exploring the slippage behaviour of carbon FRP textile fiber in masonry reinforcement applications: insights from testing

Sıtkı Halit Canol - Engin Akçagün - Abdurrahim Yılmaz - Hafiz Faisal Siddique

more

Samin Hamayesh - Version 41.7.5