0% Complete
|
Sign in
|
Sign Up
Home
/
14th International Fiber and Polymer Research Symposium
The effects of curing agent and filler on shape memory properties of epoxy composites
Authors :
Maha Almezgagi
1
Gülcihan Güzel Kaya
2
Hüseyin Deveci
3
1-
2-
3-
Keywords :
MNA،Cycloaliphatic polyamine،Sepiolite،Bending test،Shape memory
Abstract :
Many shape memory epoxy composites are produced by using epoxy matrix with filler materials as well as different kinds of curing agents [1]. In this study, diglycidyl ether of bisphenol A (DGEBA) was cured by methyl nadic anhydride (MNA) and cycloaliphatic polyamine (ipox EH 2041), respectively. Also, sepiolite was used as a filler to investigate the effects of filler on the shape memory properties of the epoxy composites. Tensile tests and differential scanning calorimetry (DSC) analyses were conducted to examine the mechanical and thermal characteristics of the composites, respectively. Moreover, shape memory properties were investigated by using bending tests. The influence of recovery temperature and repeated cycles on the shape memory properties of the composites were revealed in the case of different recovery temperatures and cycle parameters. As a result, the recovery values of MNA and cycloaliphatic polyamine cured epoxy composites were around 99% and 98%, respectively. Additionally, the glass transition temperature (Tg) of the composites (MNA/sepiolite and cycloaliphatic polyamine/sepiolite) were around 47.2 and 50.4 oC, respectively.
Papers List
List of archived papers
YUMUŞAK ÖRME KUMAŞLARIN ÜRETİMİNE YÖNELİK HİBRİD İPLİKLERİN TASARIMI VE ÜRETİMİ (G-SOFT)
Gonca YILDIZ PABUŞÇU - Ayşe TÜRKTAŞ ALİ - Timur ATİK
Synthesis and melt spinning of thermoplastic cellulose: A short review
Maryam Sabzi Mobarakeh - Mohammad Ali Tavanaie - Seyed Hajir Bahrami
Eco-friendly composite production using thermoset waste from the automotive industry as filler material
Aysu Çavuşoğlu - Pelin Şahin - Naci Uysal - İdris Karagöz
Effect of Fused Deposition Modeling (FDM) Process Parameters on Mechanical Properties of Woven Polymeric Structures
Shree Kaji Ghimire - Ashok Sapkota - Sabit Adanur - Emel Kuram - Recep Onler
Enhancing Mechanical and Thermal Properties of PLA by Incorporating Ulexite and Colemanite Minerals
Oğulcan Kocagül - Merve Mocan
Bigbag üretiminde kullanılan dikiş iplerinin geri dönüştürülmüş plastik kaynaklarından üretilmesi ve uygulanabilirliği
Betül Gülgeç - Mehmet Zeybek - Erhan Demircan
Carbonization and characterization of waste PAN fibers for compliance with the green agreement and contribution to the carbon footprint via energy production from the process
Müge Çağlar - Samet Yuvayapan
Hibrit Malzemelerin Darbe Karakteristiğine FDM Tipi 3B Yazıcı Üretim Sıcaklığının Etkisinin İncelenmesi
Tarkan AKDERYA - Rumeysa İNCESU - Ataberk KAPLAN - Gülbahar TABAKOĞLU - Buket OKUTAN BABA
Advantages of fluorosilicone polymers, aging properties and advance oil resistance performance
Hande Eyvazoğlu - Mucize Ceren Miçonunoğlu - Büşra Doğanay Alçiçek
DOPO Akrilat ile Kaplanan Pamuklu Kumaşların Alev Geciktirici Özelliklerinin İncelenmesi
Aleyna Turanlı - Levent Babayiğit - Cemil Dızman
more
Samin Hamayesh - Version 41.7.5